welding to a pickup frame

I thank everyone for their input. I have finished the project had to go in from the top cutting a hole in the bed over the frame. I did disconnect the battery and kept my ground as close as possible as far as I can tell I don't have any problems and my welds seem to be holding up. I am currently looking at 8-10 inches of snow (NW Montana) not much incentive to get out and take pic's not as much fun at 71 as it was even 10 years ago.
 
Don't weld it; bolt it.


unfortunately bolting to the area where it needed to go was not an option as the under bed spare tire rack and the trailer hitch mount were interfering besides it is done now and everything seems to be working well.
 
Back
Top