Used Tormach TTS Tools

jweaver72

Active User
Registered
Joined
Nov 17, 2013
Messages
36
I found a set of used Tormach TTS tooling on another forum and was able to pick it up for $250.

It looks like a good deal to me but I am new to machining and I didn't know for sure. Figured I would post it here and see how I did.

1 TTS-R8 adaptor collet
5 TTS Set screw holders - 5/16, 1/4, 3/8, 1/2 and 5/8
1 TTS Drill Chuck - 1/2" - JT6 (1)
1 TTS-JT6 with ATC geometry
2 TTS Machinable Blank
3 TTS-ER16
2 ATP flycutters - 2" and 2 1/2"
1 Iscar 30mm 3-flute Facemill (Made using a TTS blank
9 ER16 collets 1/32" to 3/8".
2 Homemade tool racks
5 HSS Blanks

1231130913.jpg

1231130913.jpg
 
I found a set of used Tormach TTS tooling on another forum and was able to pick it up for $250.

It looks like a good deal to me but I am new to machining and I didn't know for sure. Figured I would post it here and see how I did.

1 TTS-R8 adaptor collet
5 TTS Set screw holders - 5/16, 1/4, 3/8, 1/2 and 5/8
1 TTS Drill Chuck - 1/2" - JT6 (1)
1 TTS-JT6 with ATC geometry
2 TTS Machinable Blank
3 TTS-ER16
2 ATP flycutters - 2" and 2 1/2"
1 Iscar 30mm 3-flute Facemill (Made using a TTS blank
9 ER16 collets 1/32" to 3/8".
2 Homemade tool racks
5 HSS Blanks

View attachment 66969

NICE FIND
 
Hi J,

I think you did fairly well on the purchase. The new price on the Tormach web site for 5 set screw holders and 3 collet holders is a little over $200 and the collets are worth around $110. I didn’t look up any of the other tool prices.

Kevin
 
Back
Top