UPDATED: For trade

[gi_984]

Dumont broach set and vise stop no longer available.

 

[gi_984]

Jacobs 33 BA and Jacobs 6A drill chucks- work good, smooth movement, up to 1/2 inch, with the keys, the 6A has a small crack at the edge of the sleeve, does not seem to effect function at all, see close up.
Two small plastic drill indexes, one has some HSS twist drills in it.
Jacobs drill chucks with keys, 3/8 capacity, extra keys odd keys. Rachet chuck keys GONE

Check out the shop tips #278 video from Tubal Caine on center drill drivers.

These center drill drivers are extras. All made by Collis or Scully Jones.
MT 2 size for #5 center drills. I've got one for a #6 center drill
MT 3 size for #8 center drills. One for a #7 center drill

 

[gi_984]

Items I'm looking for:
A-Z reamer set
#1-#60 reamer set
Grinding vise
Heinemann transfer screws
end mill grinding jig
Tap sets (taper, plug,bottoming) 1inch-12tpi, 4-48, 5-40, 5-44, 12-28,
Reamer set by 64ths, up to 1/2 inch. Hand or chucking

 

[4GSR]

I'll trad you the three Jacobs repair kits for a 16N repair kit. Ken

I also have taps and dies for those sizes too. The taps, I may not be able to provide T-P-B in each size. The dies, I'm pretty sure I have spares for those sizes also. The dies are used in good shape, taps vary but sharp.

I do have a Weldon end mill sharpening fixture that is complete. I like to get what I have tied up in it. We can discuss price if interested and I'll be glad to provide pictures, too.

Ken