[Newbie] Unimat Sl, Not True.

I have used a simple method to synchronize the sequential starts on my 3 jaw in my SB 9A. This assumes that all 3 jaws are starting in their correct slots. What I do is insert all 3 jaws and snap a stretched O ring or strong rubber band around the jaws to place a light force inward on them. After that I rotate the scroll backwards until I recognize 3 or more clicks. Then I rotate the scroll inward and the jaws will find their way into the correct position. If 1 jaw is out 1 notch I reverse the procedure until all 3 synchronize.
All these years and I have never seen that nor thought of it. Talk about the obvious staring you in the face!
And I have a coffee can filled with large bands. Must learn something new each and every day...

:idea:
 
I just look in the slot until the right one is up then feed them in the order they go. Seems easier then having to juggle them getting a band on & that way you don't get them backwards. I like having mine marked where they go anyhow.
 
Back
Top