Turret Riser for a PM935?

No problem Alan.
Don't know why I get the dreaded red-x, Im posting from an Apple desk top.

Greg
 
You were right Alan, 15 inches in dia.

Greg
 
Greg, this confirms that your machine and the PM935 are different. Your machine uses a standard size diameter riser that can be acquired from numerous vendors. Of course it does not fit the PM935. Thanks Greg for all your help nailing this down.
 
I have been in touch with Matt at QMT and he was kind enough to reach out to the factory to see if they make a riser. As usual, Matt was quite responsive and I heard from him today and unfortunately the factory does not make one. Matt is also not aware of anyone who is making one so he cannot recommend any alternatives at this point.

Alternatively one might considering making one form DOM tubing. The material does appear to be available in a diameter and a thickness that should work well. I'll give that some thought.
 
Glad the measurement helped. I had originally thought about making one but the price on this one was too good. The one concern I had with making a steel one was whether the steel would ring.

Greg
 
Back
Top