The 9x20 Mods Thread

[savarin]

The larger gears need to be made into Ring gears with a .5625 bore.

"Billy G"

Why is that Bill?

 

[Bill Gruby]

Two done ready to solder. Soft soldering will be more than adequate and easier. As you can see Charles, the original hubs were way too small. Only had a .125 bore, needed to be .3125 bore. to fit the shafts.

"Billy G"

 

[Bill Gruby]

How it was done. I put a 1/2 endmill in the drill chuck in my tail stock. Bored it thru. I moved the endmill to the QCTP and centered it in the existing hole I bored. Then used only one lip of the tool to bore it to size. You won't ever see any machine I am using clean. I won't take the time to pretty a picture.

"Billy G"

 

[savarin]

You won't ever see any machine I am using clean. I won't take the time to pretty a picture.

"Billy G"

:lmao: I feel better now knowing I'm not alone :lmao:

 

[savarin]

any further along Bill?