Tachulator Cover (on a Takisawa Lathe)

fitznoodle

Registered
Registered
Joined
Jun 17, 2013
Messages
15
This is a cover for the Tachulator on my lathe's retrofitted electronics cabinet. I engraved it on a piece of aluminum sheet with my 30" x 60" Holzher gantry router. The Tachulator instruction sheet had dims for the LED's and knobs and whatnot, so I took them off that print. Takisawa is the lathe brand; something had to go in that spot. ;-)

CAM00557.jpg

CAM00557.jpg
 
Back
Top