Really cool TINY chips! 1/64 inch! :)

itsme_Bernie

Active User
H-M Lifetime Diamond Member
Joined
Jan 11, 2013
Messages
1,834
Ok Fellow Machine Geeks

If I can't post this here, I can't post it anywhere!

I included the geeky details below, but here is a pic I took of some chips I made tonight, finish boring some steel tonight! They are sitting on a 1/64 inch ruler:


a8e4u6yz.jpg


I was putting a 5/8 in bore I piece of 1 inch steel, most likely 12L14, on my Heavy 10 in 5C collet. My feed was .0032, depth of cut was .004, 750 RPM. I was using an HSS boring bar pictures below:
I LOVE these Bokum Boring Bars!

ezebytuq.jpg

Bernie


South Bend 10L

a8e4u6yz.jpg

ezebytuq.jpg
 
Bernie,
Beautiful chips. Do you have a part number or model on that boring bar. I think the shape is similar to something I'm looking for but i didn't see it on their ebay site.
Thanks,
Dave
 
Hey Dave,

I can get that to you tomorrow.. These Bokum bars are fantastic. HSS or carbide.



Bernie
 
Seems you reinvented "The microchip".

Ray
 
Thanks Ray now everyone on my hall at work is wondering why I am laughing like a crazy person. :roflmao::roflmao::roflmao::roflmao: Bernie those are some incredible chips you must have had the tool set up just right.

Jeff



Seems you reinvented "The microchip".

Ray
 
Back
Top