pm25mv fix

LEM

Registered
Registered
Joined
Apr 8, 2015
Messages
37
Got tired of turning the draw bar 9mm. Made my fingers sore. An epiphany happened. Why not use a socket and a thumb drive. Works terrific. R8 collets are tightened sufficiently. I do sometimes put the wrench on it but very seldom. You must use a 12 pt socket.
mill-800.jpg
 
I made a knurled aluminum spinner within a week of getting my PM25. I still use two wrenches to loosen and tighten the collets.
 
Back
Top