PM-940 Mach3 Profile or Config

megaplow

Still have 10 fingers
Registered
Joined
Dec 14, 2017
Messages
29
Hey All,
My pm940 finally showed up, it is way bigger than I expected. I got power to it and am able to turn it on, phew! Is there a recent set of screen grabs for the config or is there a mach 3 machine profile floating around?I am really excited to get the thing tuned up and making chips.

There is good info here but I am unsure how timely it is:
http://www.hobby-machinist.com/threads/pm-940m-cnc-pre-assembled.49011

Thanks
 
Last edited by a moderator:
I've read that the controller supplied with the PM benchtop CNC machines can be difficult to set up. Some have retrofitted their machines with a more main stream controller/breakout board to bypass the configuring headaches. Sorry for not giving you the help you asked for. My recommendation is to PM the members mentioned in the attached thread. That way you will be getting specific configuration feedback for your controller.
 
PM the other members is a good call, thanks!

Are you thinking an alternate control board like a smoothie board?
 
Back
Top