Optical Centering Microscope Prints

rwm

rwm

Robert
H-M Lifetime Diamond Member
Joined
Mar 25, 2013
Messages
4,612
Gunrunner you need to order a set of these for the Z axis hand crank. Bill did you just spit coffee on your monitor? :rofl:

View attachment 253356

32073816580_239891bbcf_b.jpg

32071173610_aeab46ed96_b.jpg

32071173570_bfc7445f63_b.jpg

32071289380_c5f37b27c7_b.jpg

32409802036_48ee9fc070_b.jpg

32082797370_8ccca9bd20_b.jpg
 

Attachments

  • Centering Microscope - Spindle Mount Drawing ISO v1.pdf
    157.7 KB · Views: 64
  • Centering Microscope - Tube Drawing v1.pdf
    172.4 KB · Views: 43
  • Centering Microscope- Mirror Mount Drawing v0.pdf
    163.3 KB · Views: 47
  • Centering Microscope - Body Imperial Drawing v1.pdf
    172.6 KB · Views: 44
Last edited:
Pretty dang impressive for a first time using Fusion 360. Are you familiar with any other 3d program?
Looking forward to the finished product.

CHuck the grumpy old guy
 
Gunrunner you need to order a set of these for the Z axis hand crank. Bill did you just spit coffee on your monitor? :rofl:

View attachment 253356

32082797520_b4eebaf134_b.jpg

32327453425_08b791a360_h.jpg
 
Last edited:
I am Truly GRATEFUL FOR THE DRAWINGS that you invested your knowledge and time into to pass along to newbies like myself. I really enjoy trying to make as many of my shop tools as possible- mainly cause of the cost of them but also the chance to LEARN A NEW TRADE AND EXPERIENCE THE FUN OF MAKING SOMETHING WITH my own Hands.
So THANKS AGAIN SOOOOOO MUCH. MIKE (shootur44) from Shreveport area


Sent from my iPhone using Tapatalk
 
Welcome aboard Mike (shootur)! This is the kind of stuff this forum is made of. Hang in there and learn learn learn.
DON'T BE AFRAID TO AKK QUESTIONS, EVEN "STUPID" ONES. A very rewarding endeavor wherever it may lead you.
I've been at it for a couple of years now on a very erratic time table. I still consider myself a newbie/nube. This incredible
project of Roberts is excellent and there are many more to be found in the depths of this forum, so dig in!

CHuck the Grumpy old Guy
 
ch2co said:
Welcome aboard Mike (shootur)! This is the kind of stuff this forum is made of. Hang in there and learn learn learn.
DON'T BE AFRAID TO AKK QUESTIONS, EVEN "STUPID" ONES. A very rewarding endeavor wherever it may lead you.
I've been at it for a couple of years now on a very erratic time table. I still consider myself a newbie/nube. This incredible
project of Roberts is excellent and there are many more to be found in the depths of this forum, so dig in!

CHuck the Grumpy old Guy
Click to expand...

Well Chuck I guess I will take you up on the offer. As I said I am new and I am trying to accumulate all the drawings for all the tools for the shop that I can get. Any shoo made lathe or mill toiling or any others that are helpful I would appreciate them. I am trying to save as money as possible on tooling cause I am on a very limited budget being that I am totally disable so thanks for any help.
Shootur44 / MIKE


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top