- Joined
- Mar 1, 2024
- Messages
- 8
You might be mistaking the clutch action as stripped gears and that is adjustable to an extent.
yes!
pulled the quill feed clutch apart after I found a spec for quill pressure (200lbs on the quill - measure it using the handwheel to feed the quill down to a scale). Adjusted it up from "unmeasurable" (kicked off with <5lbs) and got it to max out about 60-70lbs. that's with the spring fully compressed in coil bind, though.
teeth are a little beat up, but dont look horrible. I could do 200+ with the quill lever without issue, and I can see the clutch being the disengagement point.
any ideas?