Mini Mill owners check this out

Hi All,
Can some one ask a Moderator to put this post in the correct place. Thanks, I'll try and do a better job of posting in the future.
Here are some photos of the completed adapter,in total it only took a total of 7.5 hrs and an 4" piece of 6061.I used the same bolts that were in place for the bearing cover. I'm happy with the results.

Regards

dgehricke

Adapter installed2.JPGCutting radius w: hole saw 3.JPGCutting the arc for Adapter 4.JPGCutting thecounter sink for SHCB 5.JPGThinning the part 6.JPGLight installed w: adapter 1.JPGComplete Adapter ready to install 7.JPGlight installed 8.JPGLight working head up completely 9.JPGHead 1:2 way and light 1:2 way 10.JPG

Light installed w: adapter 1.JPG Adapter installed2.JPG Cutting radius w: hole saw 3.JPG Cutting the arc for Adapter 4.JPG Cutting thecounter sink for SHCB 5.JPG Thinning the part 6.JPG Complete Adapter ready to install 7.JPG light installed 8.JPG Light working head up completely 9.JPG Head 1:2 way and light 1:2 way 10.JPG
 
Yea Bill its OK with me if it OK with you.

Thanks

dgehricke
Wally G
 
Back
Top