lubricating ballscrews and slides on 6040 router.

j ferguson

Active User
Registered
Joined
Nov 28, 2013
Messages
196
I have a Chinese 6040 router which has served me well especially after I realized the lead screws were metric not imperial. Duh!
I've been using Super Lube PTFE to lubricate the ballscrews and rails. The wipers within the slides and ball-screw housings seem pretty effective since both screws and rails seem to be dry after I've run machine. Would you use something else and if so, what and why?

John
 
Back
Top