Lost a couple of parts for a 9a

[Darkside]

I bought a pretty beat up 9a this spring, and I've been slowly tearing it down and cleaning and painting it. I've been reading and lurking to get as much info as I can retain over the months, but in reassembling the apron and saddle I've lost my saddle lock, and the retaining ring for the hand wheel pinion. If anyone out there has either for sale please contact me.

Randy

 

[Darkside]

well, I was able to make a retaining ring from an old wire key ring. I found a picture of a saddle brake online and was able to cobble one from 3/8" bar stock. the original is 1/2" but I didn't have any around. luckily the dimensions aren't too critical so I was able to cobble this together with a 5" grinder with a cutoff wheel and a drill press