No Fly post 10 doesn't give me enough. I also need a better explanation of the wire colors in this picture: I need the bundles and colors one by one. That one you are touching, what color is that big wire that's tied to red?
Mark
ok, here we go:
1. a bundle of green, red, black and white in a piece of 12/4 rubbercord went from the reversing switch to the motor
2. Green: green was originally attached to one of the two red motor wires - this is the pair that is in the picture you quoted and asked what color it was
3. Red: as per picture below, red was attached to the other red motor wire
4. Black: as per the picture below, Black was attached to 2 motor wires, one green and one blue/green:
View attachment 23 5864[/ATTACH]
5. White: also in the picture above, you can see white attached to the final 2 motor wires - don't be fooled by the appearance of what you see - the motor wire colors correspond most closely to white and yellow
6. Reversing switch: to see where the other end of those four wires above connect to the reversing switch, please reference the drawing below - it is the wire on the right entitled LOAD (I don't know if that is correct use of that word) - recall an earlier post where I said that the drawing is of the switch upside down - so what appears left in the drawing is actually right when the switch is installed
I do not know what the "start cap" is - can you please elaborate a bit on that?
thanks