- Joined
- Dec 10, 2021
- Messages
- 24
Is there any way to tell without pulling the plate off the motor? There is no way I can get to it without pulling the entire motor out.
Can I tell by taking the low high switch out?
Update: I pulled the switch out and connect the VFD to wires mark U2, V2, and W2 and the motor turned, but at full power it was turning maybe 40-60 rpm.
Can I tell by taking the low high switch out?
Update: I pulled the switch out and connect the VFD to wires mark U2, V2, and W2 and the motor turned, but at full power it was turning maybe 40-60 rpm.
Last edited: