- Joined
- Aug 22, 2012
- Messages
- 4,116
how I made my handle and nut
www.hobby-machinist.com
and the solid plinth.
I did the nut up tight before I marked where the handle should go.
Plinth For Qctp On 9 X 20 Lathe
In my never ceasing search for more rigidity in my lathe I decided to make a plinth for the qctp. In its normal configuration I can often see the complete top slide assembly flex slightly. (I think I punish my lathe a bit) After seeing Bill G's plinth I felt it was time to go. I forgot to take...
www.hobby-machinist.com
I did the nut up tight before I marked where the handle should go.