W
WMello
Forum Guest
Register Today
Made a little cradle to hold W1 square stock on the CNC vise.
This set the the front and side relief angles.
Now I can draw the required profile in CAD and cut the bit.
Right side:
Turn cradle around for left side:
Then heat treatment and a bit of clean up with a stone, and done.
This will be especially useful to create fly cutters for the clock wheels.
Wagner
This set the the front and side relief angles.
Now I can draw the required profile in CAD and cut the bit.
Right side:
Turn cradle around for left side:
Then heat treatment and a bit of clean up with a stone, and done.
This will be especially useful to create fly cutters for the clock wheels.
Wagner