Inside Jaws For 7 1/2" Buck Adjust-tru 6-jaw

[chrism]

Hi all,

I have a Buck adjust-tru 6 jaw chuck that is 7.5" in diameter. I am looking for a set of inside jaws for it. Does anyone have a set lying around or any leads as where to find a set? Any help would be greatly appreciated.

With regards,
Chris

 

[mksj]

Have you tried calling Buck, or some of the vendors that sell chucks. I doubt anyone would have a spare set lying around for sale. I would check with Ajax Industries, they deal with a lot of different chucks, I have purchased from them in the past and they have been very helpful and reasonably priced. There are also a couple of vendors that sell jaws, but I think you will need to get a factory set, ad they are usually machined to a specific chuck, and a specific order. It will be pricey.
http://www.buckchuckusa.com/
http://ajaxtoolsupply.dreamscape.com/

 

[kd4gij]

Try Buck.
http://www.buckchuckusa.com/products/manual-chucks-atsc-6-jaw.html

 

[Bamban]

Is this the single pinion Buck? What is the model number stamped on the face of it?

 

[chrism]

Model number stamped on it is 4761

 

[chrism]

Hi all, found a pair at Small Tools. Thanks for all your help!