- Joined
- Dec 3, 2013
- Messages
- 1,844
I have a job that has a precision fit 4.5" inside a 2" tube. The only boring bar I had that was rigid enough is a 1-1/4" shank bar that uses #4 size CCMT inserts and I only have roughing inserts in that size. Additionally the boring bar fills most of the ID of the tube and it would load up with chips quickly slowing the process.
I looked for a 1" shank boring bar that would take #3 size CCGT inserts but could not find one so I rolled my own made from some 1" CRS I had in the bin.
I modeled it is Solidworks and machined it on the CNC mill.
I looked for a 1" shank boring bar that would take #3 size CCGT inserts but could not find one so I rolled my own made from some 1" CRS I had in the bin.
I modeled it is Solidworks and machined it on the CNC mill.