- Joined
- Mar 25, 2015
- Messages
- 95
I got tired of dodging hot chips so I decided to make myself a chip shield. I looked at the Flexbar but when I saw the price I decided to make my own.
It's a 1/8" piece of plex about 8"x15" with some cut outs and a 45 degree bend on one side. I wanted it removable so it's mounted with a magnet in the 1" alum. base. I used a piece of 1/2" drill rod for the upright support. REAL simple to make and it works great!
It's a 1/8" piece of plex about 8"x15" with some cut outs and a 45 degree bend on one side. I wanted it removable so it's mounted with a magnet in the 1" alum. base. I used a piece of 1/2" drill rod for the upright support. REAL simple to make and it works great!