Hi all. I have searched and read every thread out there regarding how to wire for-rev switch to a VFD.
I cant get my head around how to.. I want to use my apron microswitches and I need your help.
My vfd is the well known Huanyang thingy. I have attached a photo of the switch and the connector bridge in
the VFD.
I am familiar with programming theses things but this wiring saga puzzles me.
Can someone please help me explain what wire should go where from switch to vfd?
This lathe is a 12x36 as Grizzly, Enco and others sell.
Thanks in advance.
I cant get my head around how to.. I want to use my apron microswitches and I need your help.
My vfd is the well known Huanyang thingy. I have attached a photo of the switch and the connector bridge in
the VFD.
I am familiar with programming theses things but this wiring saga puzzles me.
Can someone please help me explain what wire should go where from switch to vfd?
This lathe is a 12x36 as Grizzly, Enco and others sell.
Thanks in advance.