Thought we had photo of the drum switch, can get one if needed...
Photo is of the main switch, speed adjust control and a meter connected to a control line from VFD that indicates relative speed, can be set to load too.
Ours is VFD and drum switch is logic into the VFD.
A 2P1P 20 amp rated light switch is main power into VFD.
We reconfigured our drum switch as 3 separate circuits by removing The cross jumpers.
Next we bent the contacts so one would always "make" first.
This is the "stop on open" function.
Another closes either position as "run" and the last only one side as "reverse"
For a pilot light we went low tech!
Found a 240 VAC NEON panel mount pilot light and mounted it in the drum switch, it is only 3/8 or so diameter so near the bottom where the power wires would normal be secured.
It is connected to the input to the VFD via fuses.
If main is on and plugged in the pilot glows.
Sent from my SAMSUNG-SM-G930A using Tapatalk