Home made hyd shop press

aametalmaster

Registered
Registered
Joined
Sep 23, 2010
Messages
619
I needed to push out some new bearings and the shop up the street wanted 40 bucks. I had started this press 15 or so years ago but never welded it together. So i spent an evening doing the finish welding and another night on the lathe making the parts to hold a hyd jack. I used a 6 ton that was on hand but 10 ton would be better. I also custom make driveshafts and always need to push out U joints...Bob

press5a.JPG press6.jpg press7.jpg press jack1a.JPG
 
Last edited by a moderator:
Back
Top