Galil analog input

Karl_T

H-M Supporter - Sustaining Member
H-M Platinum Supporter
Joined
Oct 14, 2014
Messages
1,951
https://www.ebay.com/itm/0-200-Temp...567995?hash=item1c7c7bbb7b:g:VLIAAOSwOgdYnAoP

I wired this up wrong and do not understand how to do it correctly. See the attached pic. blue is +24V, white is dc common, yellow is the wire I need 0 – 10 volt for my Galil analog pickup. the value of the resistors is 1K ohm, two parallel made it 500 ohm.

I am getting 1.77 volts at room temperature, the same in the –10 freezer.temp sensor.jpg
 
Dam-mm, so I bought a sensor without the sensor (probe). Somethings these really cheap made in China components are not worth much.

Thanks.

I bought this probe off ebay:
https://www.ebay.com/itm/222537852633

may still need to confirm wiring. all I see on the probe is three colors of connectors. do not know what goes where.

Karl
 
Last edited:
Back
Top