- Joined
- Dec 6, 2011
- Messages
- 217
It did fit but, the hole to receive the bolt from the cross-slide is missing.
This is the problem I had with the original nut that came with the taper attachment.
I called grizzly and the customer support department said that the customer has to drill their own hole and tap it. The installation instructions indicate the nut should already have a hole. ????
This is the problem I had with the original nut that came with the taper attachment.
I called grizzly and the customer support department said that the customer has to drill their own hole and tap it. The installation instructions indicate the nut should already have a hole. ????