- Joined
- Jul 14, 2013
- Messages
- 198
After putting it off, I finally bored out my 7x10 3 jaw chuck to full 3/4"
Now I can put 3/4" stock throught the chuck.
Many have ground the back cover screws to clear, but I used sockethead caps screws cut to a head diameter of .070
that means I don't have to index the screws in the same holes next time I disassemble the chuck.
Now I can put 3/4" stock throught the chuck.
Many have ground the back cover screws to clear, but I used sockethead caps screws cut to a head diameter of .070
that means I don't have to index the screws in the same holes next time I disassemble the chuck.