Ellis Saw Part Stop

RandyM

Mr. Deliberate
H-M Supporter Gold Member
Joined
Apr 12, 2011
Messages
3,571
Well, I finally got around to adding a part stop to my Ellis bandsaw. Here is what I cam up with. I used the cut-outs in the frame that are normally used for the optional part support extensions. I eventually want to add scale markings for cut lengths.

DSC03768.JPGDSC03769.JPG
 
Nice! I've been meaning to make some kind of work stop for a long time. Unfortunately, I use the outfeed table assy, so I'll probably end up drilling and tapping the table and mounting something from underneath.

The outfeed comes with a workstop on the outboard end and it's a nice arrangement, but only good for parts ~28" or longer.

GsT
 
Back
Top