Dc motor power from treadmill power supply

[mrbreezeet1]

I have repurposed probably 6 or 7 treadmills. I've not seen a controller board like yours. I would recommend getting a MC-60 controller off of e-bay or a KBIC controller for the DC voltage of your motor.

http://www.kbelectronics.com/

Chuck

Bit of an old thread here l know, but I wanted to ask you guys,
(And chuck, I think you helped me before.)
I have the thread, "wanting to power a leadscrew"
then it got off, on to treadmill motors,
But what board is better, and why, if you don't mind.
I have the KK6039T board, that came with my treadmill I got for free, put in my Craftsman 150 Drill press.
http://www.youtube.com/attribution_link?a=h-u5c52uMoQ&u=/watch?v=mt16GQ_qG4U&feature=share
But if you look at this board,(KK6039T) and look at a KBIC 120 board,
Looks like a lot more components on the KBIC board.

Although the KK6039T seems to be a fine little board, as in working fine/working well.
I was able to use the pot that came with the treadmill for the drill press too.

Would I see any difference using a KBIC 120 board?
I just got one used off 3 ebay for $29.00 inc. shipping, I thought the price was pretty good.

Then what about the mc-60 boards?
I have one of them here too.
Shown here is the KBIC 120 Ihave coming from e bay, and the KK6039T board that I am using on the drill press. KK6039T is shown first.

 

[Kernbigo]

this is a mc60 wiring dia.