Copycat Mill Build.

Blackhawk

Active User
Registered
Joined
Oct 20, 2012
Messages
255
I'm building the same mill as steve and was looking for advice from the forum members as i go. i was having problems with the electronics untill i got a link from a forum member from steves build and it proved to be the solution. here is the link to the video. <iframe width="420" height="315" src="http://www.youtube.com/embed/yvfn82KQoC0" frameborder="0" allowfullscreen></iframe>
 
Woops, video did not show, will have to research how to upload and repost.

rob
 
success, i got the 4200 running from the smaller driver so i know it works, now i just need to find connector for the big driver. does anyone know where i might find it?

lanham
Picture 3.jpg

Picture 3.jpg
 
ybrgmountplate.jpgdoing this on a manual mill is taking a long time. This pic shows steves file and the coordinates i added from emachineshop. now i need to figure out what size bolts and what holes to tap and what size

lanhamk

ybrgmountplate.jpg
 
my controller came with the plug?
if you need help i can post the connections for that controller.
there are far more connections than needed and it is easy to connect once you have the plug.
( I dont seem to be getting all the threads i reply in in my email? if you have questions and i dont reply pm me I'd be glad to help you)
steve

yaxiswithnotes.png
 
Back
Top