Can Anyone Identify The Manufacturer Of China Lathe?

[RickT]

I have a 10" x 22" metal lathe that was purchased from House of Tools in Saskatoon, SK. before they closed down. The manual says it is a Supra BVC25A x 550 Bench Lathe. I would like to contact the maker for some parts and information.
Sieg says it is not one of theirs.

 

[DAT510]

You might try contacting http://www.adendorff.co.za
They sell the same lathe. http://www.adendorff.co.za/DynamicData/ProductPDFs/ELATHE525.pdf
or
http://www.minitech.com.au/lathe-250-x-550-with-g-box

Hope this helps,

Chris

 

[atunguyd]

Rick, ardenhoff is close to me. If you need to get parts through them I can help.

Sent from my SM-N920C using Tapatalk

 

[RickT]

You might try contacting http://www.adendorff.co.za
They sell the same lathe. http://www.adendorff.co.za/DynamicData/ProductPDFs/ELATHE525.pdf
or
http://www.minitech.com.au/lathe-250-x-550-with-g-box

Hope this helps,

Chris

Thanks Chris!
I contacted Adendorff, and they told me it is discontinued and there are no parts available. (Not very helpful).
I have just sent an email to Minitech- hope they are better.

 

[KWMD2000]

I have a 10" x 22" metal lathe that was purchased from House of Tools in Saskatoon, SK. before they closed down. The manual says it is a Supra BVC25A x 550 Bench Lathe. I would like to contact the maker for some parts and information.
Sieg says it is not one of theirs.
View attachment 141607

do you have a copy of the manual? I have the same machine and I am having a time deciphering the thread cutting diagram.

 

[RickT]

I have attached a copy of the manual for you.
Happy Machining,
Rick