- Joined
- Nov 26, 2017
- Messages
- 1,518
Congrats, that is a nice set for the money.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Broach set and arbor press- $200 (Grass Valley, CA)
- Thread starter MrWhoopee
- Start date
- Joined
- Mar 26, 2018
- Messages
- 8,412
Good for you. I don't need the broach set but the HD arbor press = hard to pass up.
- Joined
- Jan 20, 2018
- Messages
- 5,675
I'd like to thank @Winegrower for enabling my TAD. It was good to meet him and get to see his shop and projects.
The arbor press is interesting, it came with a large aluminum base-plate, aluminum channel risers and an air-cylinder attached to the handle and base-plate. No idea what the purpose of all this was, obviously some special purpose repetitive work. With some modifications it will allow enough throat to accommodate the 1/4 and 3/8 broaches. It also came with a very nice shop made platen.
The arbor press is interesting, it came with a large aluminum base-plate, aluminum channel risers and an air-cylinder attached to the handle and base-plate. No idea what the purpose of all this was, obviously some special purpose repetitive work. With some modifications it will allow enough throat to accommodate the 1/4 and 3/8 broaches. It also came with a very nice shop made platen.
Last edited:
- Joined
- Aug 3, 2017
- Messages
- 2,437
Ya, looks like someone converted it to a 'push-button' arbor press at one point 
- Joined
- Jan 20, 2018
- Messages
- 5,675
No-name, a well known Chinese (or maybe Indian) brand.