- Joined
- Feb 20, 2013
- Messages
- 32
Hello, so I have a new Grizzly G0619 mill, after degreasing, spindle break in and gib adjustment I checked out the backlash on all the axis.
X axis 0.017 in
Y axis 0.010 in
Z axis 0.010 in
Is this reasonable? Can the backlash be reduced in a simple way?
X axis 0.017 in
Y axis 0.010 in
Z axis 0.010 in
Is this reasonable? Can the backlash be reduced in a simple way?