Atlas Molo Part 7 For Early Craftsman 12 Inch.

wa5cab

Downloads Moderator
Staff member
H-M Lifetime Diamond Member
Joined
Dec 25, 2011
Messages
10,477
I just uploaded under Atlas/Craftsman Lathe Manuals a revised version of the threading chart for the early 12" with 5/8" dia. lead screw and that use the 96T gear. I also uploaded a slightly updated copy of Part 7 - Threading from the 1937 MOLO Threading Supplement for the same lathes. It includes the above threading chart. The change gear brackets shown on the chart were redrawn so that they only show the two gear mounting slots and the chart was cleaned up to improve legibility.

The MOLO Supplement is under Atlas Molo, not Craftsman Manuals.
 
Back
Top