Asking for help on an ancient knee mill, PM-939G

[cg_machinist]

Hi, y'all! I am currently getting the mill back in service, it's the very one in my avatar image. Wanted to know more about that machine, are there any manual(s) regarding the PM-939G? Or the circa? Thank you in advance

 

[T Bredehoft]

might I suggest...

Google

https://www.precisionmatthews.com/,

somewheres near Pittsburgh.

 

[Martin W]

Nice mill!
Martin

 

[MikeWi]

I'm not sure that's one of ours. There are some with that PM prefix that weren't sold by us. Our logo isn't there either. In any case, no manual, and no idea of the age, sorry.

 

[matthewsx]

Even if you find a manual it may not be much help. I’d go over it carefully, find all the oil points, make sure everything is tight and fire it up.

Ask any questions, ask them here.

And as for ancient….

Not even close

John

 

[benmychree]

might I suggest...

Google

https://www.precisionmatthews.com/,

somewheres near Pittsburgh.

Wrong Pittsburgh, this is California, not Pa.