Anyone have the dimensions of the 12z base?

coolidge

Active User
Registered
Joined
Dec 18, 2013
Messages
2,012
I fired up the CAD software to design the mill stand today, I could use the length/width dimensions of the 12z base if anyone has them. The height from base bottom to top of column would also be useful. It doesn't have to be super accurate, +- .500 is fine thanks.
 
Base is 27.5" deep (front to back) and 15.5" wide.

It is 9.5" from the bottom of the machine to the top of the mill table.

It is 45.5" tall at the column and 50" tall at the motor (3 phase motor)'

Hope this helps. :)
 
Back
Top