I have a 4" 3jaw chuck threaded holes in back . I need to mount it on a backing plate for a 2 1/4-8 spindle. It looks as
if I can drill the mounting holes thru to the front of the chuck with out hitting anything operational in the chuck and
then counter bore for allen head on the front. The bolt circle is 3.31".
Thanks for any reply! OWLSHOP.
if I can drill the mounting holes thru to the front of the chuck with out hitting anything operational in the chuck and
then counter bore for allen head on the front. The bolt circle is 3.31".
Thanks for any reply! OWLSHOP.