An 10x24 Lathe Back Plate Or Complete Chuck

Bamban

Bamban

Active User
H-M Supporter Gold Member
Joined
Jul 13, 2014
Messages
1,051
As the title says, I am looking for back plate or even a complete chuck that would fit an old Jet 10x24 lathe with spindle nose , 2 x 8 TPI.
 
I took some pictures of the spindle nose to show the dimensions of the back plate I am looking for.

Spindle length.jpg Spindle thread length.jpg Spindle thread.jpg Spindle unthreaded.jpg Thread pitch gauge 1.jpg Thread pitch gauge 2.jpg Thread pitch scale.jpg
 
Well, just in case you thought your post was being ignored...
I checked my extra back plate is a 2.25.
I stopped by Tried and True (used machinery and accessories). They had a 2inch but it is at least a 10pitch.

Daryl
MN
 
I don't have anything even close but you really should have put the desired plate diameter or diameter range and the spindle nose details in your title. There might be a bzillion different back plates to fit the rather large number of 10X24 lathes that have been built over the past century. If you'll give me the diameter you are looking for, I'll edit it for you.
 
You must log in or register to reply here.
Back
Top