Hi, This is my first post . This is Patf in Austin Tx. I have an amco shaper and want to build a simple indexing rotary table and wanted to know the dimentions of the original table. I have seen a picture of the rotary table complete in the amco shaper parts and accesories . It looks like it has the table with 3 t slots and a 5/8" stud that goes through the base plate? , and in to the shaper box.. This is held with a washer and a 1/2"nut similar to the stock vice. the base plate is held from truning by a 5/16 key. Does this sound correct. Thanks for any input. A picture of all the parts would be wonderful! Thanks Pat