Advice about carbide lathe tool inserts

[sacentre]

Can someone tell me the correct carbide inserts for this STGCR1010F09 lathe tool? I have no idea if these model numbers are standard throughout the industry. I bought this tool from an AliExpress seller and it was supposed to come with a set of 10 inserts . The inserts were missing so I'm left to source them separately. The model number was not specified in the seller's ad.

I ordered what looked like the correct ones from another seller. These were TCMT110204 US735 but they don't fit this shank. The hole doesn't quite line up with thread. They do however fit a Glanze SER1010 K11 so I will be able to use them.
TIA
Trevor

 

[xr650rRider]

Google is your friend.

The link below says

Tool holder For TCGT0902 Insert​

https://www.aliexpress.us/item/2251832062013412.html?gatewayAdapt=glo2usa4itemAdapt

 

[sacentre]

Thanks for the link. I spent quite a while Googling "inserts for STGCR1010 lathe tool" and the number that seems to come up most often is TCMT110204 which is why I assumed they would be the correct type. Eg. https://www.aliexpress.com/item/32859469232.html

The fact that they don't fit, (but do fit the Glanze) makes me wonder if the shank I bought is sub-standard or out of tolerance.

 

[xr650rRider]

The 1102 is telling you that it's a larger insert than a 0902. So that's why it doesn't fit.

1102
https://echaintool.com/page/product/show.aspx?num=1239&kind=65&page=&lang=US

0902
https://echaintool.com/page/product/show.aspx?num=70&kind=65&page=&lang=US

See the F09 in part number for tool holder? I bet one for an 1102 is F11.

 

[sacentre]

Thanks. Just what I needed to know.

​

 

[verbotenwhisky]

Thanks for the link. I spent quite a while Googling "inserts for STGCR1010 lathe tool" and the number that seems to come up most often is TCMT110204 which is why I assumed they would be the correct type. Eg. https://www.aliexpress.com/item/32859469232.html

The fact that they don't fit, (but do fit the Glanze) makes me wonder if the shank I bought is sub-standard or out of tolerance. View attachment 453757

Might be why they didn't send the inserts.