- Joined
- Sep 22, 2010
- Messages
- 7,223
http://www.projectsinmetal.com/free-metalworking-project-plans-a-toolpost-for-the-cross-slide-lathe/
Thor Hansen has several great plans on his website. (http://thor50hansen.mittnettsted.com/m/indexe.htm) This particular plan is for a very rigid toolpost that can be made completely on the lathe (not requiring a mill). Thor walks the reader through the process in the PDF document below. Be sure to visit Thor’s site for more great plans.
Thor Hansen has several great plans on his website. (http://thor50hansen.mittnettsted.com/m/indexe.htm) This particular plan is for a very rigid toolpost that can be made completely on the lathe (not requiring a mill). Thor walks the reader through the process in the PDF document below. Be sure to visit Thor’s site for more great plans.
Last edited by a moderator: