A Globe Milling Attachment. Well, part of one, anyway...

Dave, yes, thanks. That's a lot less than I gave for mine :). If you look at the pictures above, you will notice that the bosses that the drive arms mount on are missing from mine, someone cut them off at some point. I would like dimensions for those bosses, or a picture of the headstock side and the back side with a ruler next to them so that I can scale them and build some new ones and braze on to mine. That's a pretty good looking unit you have there, much more complete than mine.
 
Darn, after a closer look, mine is not the same as yours. The main casting is not the same? So all of the drive linkage will be different. I guess I’m of no help? Very sorry…Dave.
globe1.JPG
globe2.JPG
 
Yes, looks like the main casting on yours has been modified? Here are some pics. Please note that the ruler I’m using does not go to “0” at the end. So subtract 1/8” were applicable. In the second pic the ruler is in line with the spindle center.
globe3.JPG
globe4.JPG
globe5.jpg
globe6.JPG
globe7.jpg
globe8.jpg
globe9.jpg
globe10.jpg
globe11.jpg
 
Last edited:
Dave,
Thanks a bunch, those pictures will really help me out. Take care.

CJ
 
Back
Top