3 & 1/2 Axes Bridgeport

quickcut

H-M Supporter - Gold Member
H-M Supporter Gold Member
Joined
Apr 9, 2014
Messages
74
Good day all, Just started to test by Bridgeport which I recently converted to cnc. I am using the forth axes for indexing hence 3.5 axes. This was one of those machines that had a hydraulic tracer so the machine already came with ball screws. However there are two nuts per axes , and setting the correct pre-load is proving to be a task. I got this machine already stripped so the re-assembly is really a bit of trial and error.
 
Sounds like an interesting project, could you please post some pictures ?
 
Photo's to follow soon. Tried cutting a gear to-day. mod 2 78 teeth. Dividing was accurate,but the backlash in the gearbox when cutting will need to addressed with a brake , operated by a pneumatic cylinder with mach 3 doing the work of course)
 
Back
Top