- Joined
- Feb 9, 2015
- Messages
- 98
A fellow in South Texas saw a manifold listed in my online store and wanted to know if he could use it to convert the Pulsa-Jet carb on his 5hp Briggs, over to a bowl & float style carb. The one he was looking at, would not work, so I told him I would make him one for #3.00 + postage. I love a good challenge.
This is what I made from a chunk of 2.5", 6061 round bar. ---
==========================================================
A short time ago, I started making these adjustable High Speed assemblies for Harbor Freight Predator 212cc engines and any other engines, that used the same carbs. The engines come with non-adjustable jets. This unit replaces the bolt, that holds the bowl on the carb.
======================================================
Sticking with the Predator engine, I also produce these in 12mm and 10mm to 1/8 pipe adaptors for extending the oil drains on the import engines. You can add any length pipe that is needed. --- John
This is what I made from a chunk of 2.5", 6061 round bar. ---
==========================================================
A short time ago, I started making these adjustable High Speed assemblies for Harbor Freight Predator 212cc engines and any other engines, that used the same carbs. The engines come with non-adjustable jets. This unit replaces the bolt, that holds the bowl on the carb.
======================================================
Sticking with the Predator engine, I also produce these in 12mm and 10mm to 1/8 pipe adaptors for extending the oil drains on the import engines. You can add any length pipe that is needed. --- John