Logan 200 Change Gears

vincent52100

vincent52100

Registered
Registered
Joined
Mar 26, 2014
Messages
211
P1010009.JPG My Logan 200 came with a set of change gears that the PO said didn't fit. I'm hoping someone can identify these and hopefully someone would like to trade for Logan gears.
There are 10 gears:32 x2, 36, 40, 44, 46, 48, 52, 54, 56.
0.361 thick
0.742 hole
0.179 width of keyway (2 keyways in each gear)
Any help would greatly appreciated!
 
Last edited:
I will guess they are for an Atlas lathe. You might want to make a similar post on the Atlas forum and get confirmation.
 
They do look like a partial set of early Atlas gears. two 32T would be correct. The later gears have part of the part number cast in. 9-101-48 or 9-101-48A on the 48T would confirm it. I don't know how early that practice started as my lathe was made in 1980 but the first Atlas gears were made in 1932. The hub thickness appears to be the same as the tooth face. That would make them the "non-A". The only ones missing from the early set would be two 64T and two 96T. And they would fit the Atlas 918 through 10D and the first six models of the Craftsman 12": (101.07360 through 101.07401).
 
Last edited:
vincent52100 said:
View attachment 97172 My Logan 200 came with a set of change gears that the PO said didn't fit. I'm hoping someone can identify these and hopefully someone would like to trade for Logan gears.
There are 10 gears:32 x2, 36, 40, 44, 46, 48, 52, 54, 56.
0.361 thick
0.742 hole
0.179 width of keyway (2 keyways in each gear)
Any help would greatly appreciated!
Click to expand...

I just put some gears on ebay. My Logan 200 lathe was missing most the gears and I had to buy two partial sets to get them all. These gears vary a lot in price. I priced mine lower than most. Search for Logan Change gears OR my user name is mte41
 
Mork said:
I just put some gears on ebay. My Logan 200 lathe was missing most the gears and I had to buy two partial sets to get them all. These gears vary a lot in price. I priced mine lower than most. Search for Logan Change gears OR my user name is mte41
Click to expand...

Did you sell your gears already? I did not see any items with mte41 listed for sale.
 
Sorry the gears sold maybe two days after I posted this. In hind sight I should have asked more for them. Oh well, I probably made somebody happy. I just can't imagine asking $49 for one gear. I sold mine for 20 each with free shipping. One guy bought them all so the shipping was not so bad. I actually had to by two sets on ebay to get all the gears at almost $300 but then I sold 8 (duplicates) of them for $20 each. I think I have about $150 into a full set of 17 gears.

Be patient and watch for auctions with several gears, you will get a much better deal. Good luck.
 
bama7 said:
Did you sell your gears already? I did not see any items with mte41 listed for sale.
Click to expand...
Send me a PM with what you need, I do have some extras. I need to inventory to see what is actually extra, and its jam canning season ... so it might take a couple days.
 
Cool! I should have posted a request before I spent a ton on ebay!
 
Mister Ed said:
Send me a PM with what you need, I do have some extras. I need to inventory to see what is actually extra, and its jam canning season ... so it might take a couple days.
Click to expand...
I sent two PM's. I fat fingered the first before I was finished.
 
You must log in or register to reply here.
Back
Top