Reamers For Donation

I'm still interested. I'd like the larger sizes but need all the oddball sizes you have. Just pick out 5 and let me know where to send the $$$.
 
i'll compile a list of reamers available this evening when i get home from work so well have a better idea of who should get what....
 
Thank you.
I am interested in the letter and metric reamers as well.
Letters: B D O and R
Metric: any
Fractional: 3/16" 5/32" 1/4" 3/8" 5/16"
I can only use straight flute chucking reamers.
Do they need to be sharpened?

Please let me know what choices I have. I know I'm limited to 5. Thanks so much, really appreciated.
 
Hate to say it, but a list of sizes,quantities, and condition, 1 ----- 4 would greatly
increase the value. I would help in this, but for distance...........BLJHB.
 
How do you sharpen a reamer without making it a different size?

The reamer is not cut down in size, when sharpening, only the end geometry is cut like you would a drill.
Drills get sharpened and they don't get smaller. Same principal. Just the cutting edges, not the flutes.
 
Just found this thread...

I would be interested in fractional sizes, by 1/16ths... from 3/16 up... say:
3/16
1/4
5/16
3/8
7/16

I have a set of adjustable reamers I got from HF... that start around .450 or thereabouts... up to over 1.5"... so the smaller ones are what I would like to have.

Now if I can have 6 (six) reamers, rather than 5 (five)... well can we add 1/8 to the group...

Let me know... and how much $$$ to send, and where to send it...
OR... ship them to me and I will donate $20 to the forum in both my and your name...
Would that work?

THX
 
I'm looking for any 1/2 and bellow. All the way down to the smallest size you have. in fact start small and work up to 3/8 and a 1/2 would be nice. like GA Gyro, I 1/16 or smaller and work up.
The set of adjustable reamers I have was some I got from my dad when I started out as a mechanic some 30 odd years ago. And I do not know how long he had had them. Still have them, but they do not do much for anything below 3/4inch. .
 
i'm sorry guys, work was excruciatingly long today, i didn't compile the inventory list as desired.
i'll do my best to post it this weekend, tomorrow is going to be a busy day again.
my apologies for the delay.
 
Back
Top