Please Check Out Our New Christmas Gifting Thread

road

Active User
Registered
Joined
Mar 10, 2013
Messages
324
Hey All ,
I just thought I would mention this as I found myself going directly to the " New post tab " instead of checking all threads.


With Nels approval I started a gifting thread for Christmas.

It may be a little late into December to start it but the foundation is here.

Check it out :thumbzup3:


Merry Christmas
 
It's beginning to look alot like Chistmas..........so let's get the 2016 C-G-T kicked off!

uploadfromtaptalk1479263815600.jpg
I have a pristine copy of Harold Halls milling course. First pm with an adress gets it.

Sent from somwhere in east Texas by Jake!
 
I would just need the mill to go with it. My sherline mill is just a little to small.
 
The milling book is spoken for.
MERRY CHRISTMAS.!

Sent from somwhere in east Texas by Jake!
 
My turn, I will give a copy of the plans I have for a machinists tool chest to the 5th PM to me to ask for them. You can only PM once. These plans are the closest to a Gerstner chest as you will ever find. They are no longer available from anywhere. Remember one PM only. These are professionally drawn. You will get a paper set sent to you via snail mail.

"Billy G"
 
Last edited by a moderator:
thank god someone took milling book ... i really really really had a hankering for it .
but my local library happens to have it and i wouldnt have felt right taking it
 
My turn, I will give a copy of the plans I have for a machinists tool chest to the 5th PM to me to ask for them. You can only PM once. These plans are the closest to a Gerstner chest as you will ever find. They are no longer available from anywhere. Remember one PM only. These are professionally drawn. You will get a paper set sent to you via snail mail.

"Billy G"
I've got the quartersawn white oak waiting to be cut if I win. thanks.
 
I will notify all six of the people who PM'd me on this in the next few days, I am going to send a set to each of them, not just the 5th one. I have use of a large copier so it's not a problem. Well done fellas. If you are wondering if you are one of the six, if you PM'd, you are a winner. I shut it down at 6 PMs

"Billy G"
 
Last edited by a moderator:
I have 6 each Aloris -71-125-1BSL-GTN-3 blades to give away. No inserts. These blades go for $75.00 - 80.00 each, retail. I will send one each to the first 6 people who PM me with a mailing address. If your story is particularly heartbreaking I might send you two.
s-l400.jpg
 
Back
Top