- Joined
- Sep 22, 2010
- Messages
- 7,223
Do you guys have covers on your miling machines while the vice is in use?
Like this one;
![IMG_20150109_181445729_zpsi8o3l8ru.jpg IMG_20150109_181445729_zpsi8o3l8ru.jpg](https://www.hobby-machinist.com/data/attachments/146/146314-50f1493a28ed08ca554e502097381a2c.jpg)
This is 1/4" hardboard with oak strips on the sides and a quick coat of urethane. Works nice, brush the vise off on to the covers and take the covers to the trash can and dump it in. The vise is shifted off to one side in this picture so some of the table is exposed.
Like this one;
![IMG_20150109_181445729_zpsi8o3l8ru.jpg IMG_20150109_181445729_zpsi8o3l8ru.jpg](https://www.hobby-machinist.com/data/attachments/146/146314-50f1493a28ed08ca554e502097381a2c.jpg)
This is 1/4" hardboard with oak strips on the sides and a quick coat of urethane. Works nice, brush the vise off on to the covers and take the covers to the trash can and dump it in. The vise is shifted off to one side in this picture so some of the table is exposed.