- Joined
- Nov 25, 2015
- Messages
- 8,399
I have a cheap remote control (actually multiple) 3 of these units 2 with 2 channels and one with a single channel. All have seemed to work fine, one is dedicated to my DC, and the same controls a small shop vac on the other channel .. it works fine.
The other is in the metal shop. I thought the problem was my tool boxes, but after some playing it appears the shop vac motor is the cause...
The unit will turn on fine, but not turn off. If I unplug the shop vac, everything is fine. If I plug it back in, it does not shut without a fight.
Is there any filtering I can put on the shop vac plug to prevent interference.
The other is in the metal shop. I thought the problem was my tool boxes, but after some playing it appears the shop vac motor is the cause...
The unit will turn on fine, but not turn off. If I unplug the shop vac, everything is fine. If I plug it back in, it does not shut without a fight.
Is there any filtering I can put on the shop vac plug to prevent interference.